View M190A1-L01_2993879.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 2 / 26 version 2.1 - contents - revision history ------------------------------------------------------- 3 1. general description ------------------------------------------------------- 5 1.1 overview 1.2 features 1.3 application 1.4 general specifications 1.5 mechanical specifications 2. absolute maximum ratings ------------------------------------------------------- 6 2.1 absolute ratings of environment 2.2 electrical absolute ratings 2.2.1 tft lcd module 2.2.2 backlight unit 3. electrical characteristics ------------------------------------------------------- 8 3.1 tft lcd module 3.2 backlight unit 4. block diagram ------------------------------------------------------- 12 4.1 tft lcd module 4.2 backlight unit 5. input terminal pin assignment ------------------------------------------------------- 13 5.1 tft lcd module 5.2 backlight unit 5.3 color data input assignment 6. interface timing ------------------------------------------------------- 16 6.1 input signal timing specifications 6.2 power on/off sequence 7. optical characteristics ------------------------------------------------------- 18 7.1 test conditions 7.2 optical specifications 8. packaging ------------------------------------------------------- 21 8.1 packing specifications 8.2 packing method 9. definition of labels ------------------------------------------------------- 23 10. precautions ------------------------------------------------------- 24 10.1 assembly and handling precautions 10.2 safety precautions 11. mechanical characteristics ------------------------------------------------------- 25 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 3 / 26 version 2.1 revision history version date section description ver 0.0 ver.1.0 1.1 2.0 dec, 09, 04? mar, 25, 05? jun., 09, 05? jul., 11, 05? all 1.4 1.4 1.4 1.5 1.5 3.1 5.1 5.1 6.2 7.2 1.2 3.1 4.1 5.1 6.1 7 8 9.1 3.1 3.1 3.1 3.1 3.1 6.1 6.1 3.2 7.2 8.2 m190a1 -l01 specifications was first issued. change active area to 410.4 (h) x 256.5 (v) change bezel opening area from 412.2x259.2 to 414.36x260.45 change pixel pitch to 0.285 (h) x 0.285 (v) change module size tolerance change module weight from 2800 to 2500 change logic ?l? input voltage (sellvds) to logic ?l? input voltage change pin 27 name from sellvds to nc : not connection delete ?sellvds = low or open? change power on/off sequence from 0 <= t1 <= 10ms to 0.5ms <= t1 <= 10ms r g b of color chromaticity note3 definition of response time (tr, tf) add rohs compliance update mechanical drawing update rush current power supply current update block diagram modify pin25 to nc not connection update signal timing specifications modify input signal timing diagram update optical characteristics update packaging modify cmo module label definition modify power supply current unit from ma to a modify max. rush current from 2.5 to 3 modify max. power supply current white from 0.8 to 0.7 modify max. power supply curr ent black from 1.5 to 1.0 modify max. power supply current vertical stripe from 1.5 to 1.0 modify vertical active display term total from 910 to 905 horizontal active display term total from 780 to 750 value parameter symbol min. typ. max. lamp input voltage v l 693 697 770 775 847 853 power consumption p l --- 21.56 5.43 --- note (5) ta = 25 2 o c and i l = 2.0 ~ 7 . 5 7.0 ma rms item symbol typ. rx 0.638 0.636 red ry 0.348 0.349 gx 0.291 0.290 green gy 0.584 0.584 bx 0.143 0.143 color chromaticity blue by 0.081 0.080 modify figure. 8-2 8-3 packing method, for ocean shipping and for air transport www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 4 / 26 version 2.1 revision history version date section description ver 2.1 aug., 26, 05? 3.2 7.2 value parameter symbol min. typ. max. power consumption p l --- 5.43 21.72 --- optical specifications......color chroma ticity_green gy typ.0.584=>0.589 item typ. max. white variation 1.25 1.3 1.4 1.5 note (2) cr = cr (5) ? cr = cr (1) note (4) lc = l (5) ? lc = l (1) note (6) measure the luminance of gray level 255 at 9 points ? 13 points w = maximum [l (1), l (2) ?l (4), l (9)] / minimum [l (1), l (2) ? l (4), l (9)] ? w = maximum [l (1), l (2) ?l (4), l (13)] / minimum [l (1), l (2) ? l (4), l (13)] www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 5 / 26 version 2.1 1. general description 1.1 overview M190A1-L01 is a 19? wide tft liquid crystal display module with 4 ccfl backlight unit and 30 pins 2ch-lvds interface. this module supports 1440 x 900 wxga+ mode and can display 16.2m colors. the inverter module for back light is not built in. 1.2 features - wide viewing angle. - high contrast ratio - super fast response time - high color saturation - wxga+ (1440 x 900 pixels) resolution - de (data enable) only mode - lvds (low voltage differential signaling) interface - rohs compliance 1.3 application - tft lcd monitor 1.4 general specificati0ns item specification unit note diagonal size 481.4 (19.05? diagonal) mm active area 410.4 (h) x 256.5 (v) mm bezel opening area 414.36 x 260.45 mm (1) driver element a-si tft active matrix - - pixel number 1440 x r.g.b. x 900 pixel - pixel pitch 0.285 (h) x 0.285 (v) mm - pixel arrangement rgb vertical stripe - - display colors 16.2m color - transmissive mode normally white - - surface treatment hard coating (3h), anti-glare (haze 25) - - 1.5 mechanical specifications item min. typ. max. unit note horizontal(h) 426.7 427.2 427.7 mm vertical(v) 276.9 277.4 277.9 mm module size depth(d) - 17 17.5 mm (1) weight - - 2500 g - note (1) please refer to the attached drawings for more information of front and back outline dimensions. www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 6 / 26 version 2.1 2. absolute maximum ratings 2.1 absolute ratings of environment value item symbol min. max. unit note storage temperature t st -20 +60 oc (1) operating ambient temperature t op 0 +50 oc (1), (2) shock (non-operating) s nop - 50 g (3), (5) vibration (non-operating) v nop - 1.5 g (4), (5) note (1) temperature and relative humidity range is shown in the figure below. (a) 90 %rh max. (ta Q 40 oc). (b) wet-bulb temperature should be 39 oc max. (ta > 40 oc). (c) no condensation. note (2) the temperature of panel display surface area should be 0 oc min. and 60 oc max. note (3) 11ms, half sine wave, 1 time for x, y, z. note (4) 10 ~ 300 hz, 10min/cycle, 3 cycles each x, y, z. note (5) at testing vibration and shock, the fixtur e in holding the module has to be hard and rigid enough so that the module would not be twisted or bent by the fixture. relative humidity (%rh) operating range temperature (oc) 100 80 60 -20 40 0 20 -40 90 80 40 60 20 10 storage range www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 7 / 26 version 2.1 2.2 electrical absolute ratings 2.2.1 tft lcd module value item symbol min. max. unit note power supply voltage vcc -0.3 +6.0 v logic input voltage v in -0.3 4.3 v (1) 2.2.2 backlight unit value item symbol min. max. unit note lamp voltage v l - 2.5k v rms (1), (2), i l = 7.0ma lamp current i l - 7.5 ma rms lamp frequency f l - 80 khz (1), (2) note (1) permanent damage to the device may occur if maximum values are exceeded. function operation should be restricted to the conditions desc ribed under normal operating conditions. note (2) specified values are for lamp (refer to 3.2 for further information). www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 8 / 26 version 2.1 3. electrical characteristics 3.1 tft lcd module ta = 25 2 oc value parameter symbol min. typ. max. unit note power supply voltage vcc 4.5 5.0 5.5 v - ripple voltage v rp - - 100 mv - rush current i rush - 1.6 3 a (2) white 0.5 0.7 a (3)a black 0.7 1.0 a (3)b power supply current vertical stripe - - - 0.7 1.0 a (3)c lvds differential input voltage vid 100 - 600 mv lvds common input voltage vic - 1.2 - v logic ?l? input voltage vil vss - 0.8 v note (1) the module should be always operated within above ranges. note (2) measurement conditions: note (3) the specified power supply current is under the conditions at vcc = 5.0 v, ta = 25 2 oc, f v = 60 vcc rising time is 470 s 470 s +5.0v gnd 0.9vcc 0.1vcc r1 (high to low) (control signal) +12v sw q2 c1 1uf vcc +5.0v 2sk1470 q1 2sk1475 47k r2 1k vr1 47k c2 0.01uf c3 1uf fuse (lcd module input) www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 9 / 26 version 2.1 hz, whereas a power dissipation check pattern below is displayed. active area a. white pattern active area c. vertical stripe pattern r r r r r r r r g g g g b b b b b b g g g g b b b b r r active area b. black pattern www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 10 / 26 version 2.1 3.2 backlight unit ta = 25 2 oc value parameter symbol min. typ. max. unit note lamp input voltage v l 697 775 853 v rms i l = 7.0 ma lamp current i l 2.0 7.0 7.5 ma rms (1) --- --- 1500(25 ) v rms (2) lamp turn on voltage v s --- --- 1710(0 ) v rms (2) operating frequency f l 40 --- 80 khz (3) lamp life time l bl 40000 --- --- hrs (5) power consumption p l --- 21.72 --- w (4), i l = 7.0 ma note (1) lamp current is measured by utilizing hi gh frequency curre nt meters as shown below: note (2) the voltage shown above should be applied to the lamp for more than 1 second after startup. otherwise the lamp may not be turned on. note (3) the lamp frequency may produce interferen ce with horizontal synchronous frequency from the display, and this may cause line flow on the display. in order to avoid interference, the lamp frequency should be detached from the horizontal sy nchronous frequency and its harmonics as far as possible. note (4) p l = i l v l 4 ccfls note (5) the lifetime of lamp can be defined as the time in which it continues to operate under the condition ta = 25 2 o c and i l = 7.0 ma rms until one of the following events occurs: (a) when the brightness becomes or lower than 50% of its original value. (b) when the effective ignition length becomes or lower than 80% of its original value. (effective ignition length is defined as an area that ha s less than 70% brightness compared to the brightness in the center point.) note (6) the waveform of the voltage output of inverter must be area-symmetric and the design of the inverter must have specifications for the modularized lamp. the performance of the backlight, such as lifetime or brightness, is greatly influenced by the characteristics of the dc-ac inverter for the lamp. all the parameters of an inverter s hould be carefully designed to avoid producing too much current leakage from high voltage output of the inverter. when designing or ordering the inverter please make sure that a poor lighting ca used by the mismatch of the backlight and the inverter (miss-lighting, flicker, etc.) never occu rs. if the above situation is confirmed, the module should be operated in the same manners when it is installed in your instrument. lcd module inverter 1 a hv (pink) 2 lv (white) current meter yokogawa 2016 a 1 a hv (blue) 2 lv (black) www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 11 / 26 version 2.1 the output of the inverter must have symmetrical (negative and positive) voltage waveform and symmetrical current waveform.(unsy mmetrical ratio is less than 10%) please do not use the inverter which has unsymmetrical voltage and unsymmetrical current and spike wave. lamp frequency may produce interface with horizontal synchronous frequency and as a result this may cause beat on the display. therefore lamp frequency shall be as away possible from the horizontal synchronous frequency and from its harmonics in order to prevent interference. requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp. it shall help increase the lamp lifetime and reduce its leakage current. a. the asymmetry rate of the inverter waveform should be 10% below; b. the distortion rate of the waveform should be within 2 10%; c. the ideal sine wave form shall be symmetric in positive and negative polarities. i p i -p * asymmetry rate: | i p ? i ?p | / i rms * 100% * distortion rate i p (or i ?p ) / i rms www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 12 / 26 version 2.1 4. block diagram 4.1 tft lcd module 4.2 backlight unit tft lcd panel (1440x3x900) data driver ic scan driver ic backlight unit lvds input / timing controller dc/dc converter & reference voltage input connector (jae-fi-xb30srl-hf11) gnd v l vcc rxo0(+/-) rxo1(+/-) rxo2(+/-) rxo3(+/-) rxoc(+/-) rxe0(+/-) rxe1(+/-) rxe2(+/-) rxe3(+/-) rxec(+/-) lamp connector (jst-bhsr-02vs-1) 1 hv(blue) 2 lv(black) 1 hv(pink) 2 lv(white) 1 hv(blue) 2 lv(black) 1 hv(pink) 2 lv(white) nc www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 13 / 26 version 2.1 5. input terminal pin assignment 5.1 tft lcd module pin name description 1 rxo0- negative lvds differential data input. channel o0 (odd) 2 rxo0+ positive lvds differential data input. channel o0 (odd) 3 rxo1- negative lvds differential data input. channel o1 (odd) 4 rxo1+ positive lvds differential data input. channel o1 (odd) 5 rxo2- negative lvds differential data input. channel o2 (odd) 6 rxo2+ positive lvds differential data input. channel o2 (odd) 7 gnd ground 8 rxoc- negative lvds differential clock input. (odd) 9 rxoc+ positive lvds differential clock input. (odd) 10 rxo3- negative lvds differential data input. channel o3(odd) 11 rxo3+ positive lvds differential data input. channel o3 (odd) 12 rxe0- negative lvds differential data input. channel e0 (even) 13 rxe0+ positive lvds differential data input. channel e0 (even) 14 gnd ground 15 rxe1- negative lvds differential data input. channel e1 (even) 16 rxe1+ positive lvds differential data input. channel e1 (even) 17 gnd ground 18 rxe2- negative lvds differential data input. channel e2 (even) 19 rxe2+ positive lvds differential data input. channel e2 (even) 20 rxec- negative lvds differential clock input. (even) 21 rxec+ positive lvds differential clock input. (even) 22 rxe3- negative lvds differential data input. channel e3 (even) 23 rxe3+ positive lvds differential data input. channel e3 (even) 24 gnd ground 25 nc not connection. 26 nc not connection. 27 nc not connection. 28 vcc +5.0v power supply 29 vcc +5.0v power supply 30 vcc +5.0v power supply note (1) connector part no.: jae- fi-xb30srl-hf11 or equivalent. note (2) the first pixel is odd. note (3) input signal of even and odd clock should be the same timing. www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 14 / 26 version 2.1 lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel e0 data order eg0 er5 er4 er3 er2 er1 er0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel e1 data order eb1 eb0 eg5 eg4 eg3 eg2 eg1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel e2 data order de na na eb5 eb4 eb3 eb2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel e3 data order na eb7 eb6 eg7 eg6 er7 er6 lvds output d7 d6 d4 d3 d2 d1 d0 lvds channel o0 data order og0 or5 or4 or3 or2 or1 or0 lvds output d18 d15 d14 d13 d12 d9 d8 lvds channel o1 data order ob1 ob0 og5 og4 og3 og2 og1 lvds output d26 d25 d24 d22 d21 d20 d19 lvds channel o2 data order de na na ob5 ob4 ob3 ob2 lvds output d23 d17 d16 d11 d10 d5 d27 lvds channel o3 data order na ob7 ob6 og7 og6 or7 or6 www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 15 / 26 version 2.1 5.2 backlight unit pin symbol description remark 1 hv high voltage pink 2 lv low voltage white 1 hv high voltage blue 2 lv low voltage black note (1) connector part no.: bhsr-02vs-1 (jst) or equivalent note (2) user?s connector part no.:sm02b-bhss-1-tb (jst) or equivalent 5.3 color data input assignment the brightness of each primary color (red, green an d blue) is based on the 8-bit gray scale data input for the color. the higher the binary input, the brighter t he color. the table below provides the assignment of color versus data input. data signal red green blue color r7 r6 r5 r4 r3 r2 r1 r0 r7 r6 g5 g4 g3 g2 g1 g0 r7 r6 b5 b4 b3 b2 b1 b0 basic colors black red green blue cyan magenta yellow white 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 1 0 1 0 1 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 0 0 0 1 1 1 0 1 gray scale of red red(0) / dark red(1) red(2) : : red(253) red(254) red(255) 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of green green(0) / dark green(1) green(2) : : green(253) green(254) green(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 gray scale of blue blue(0) / dark blue(1) blue(2) : : blue(253) blue(254) blue(255) 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 1 1 1 0 0 1 : : 0 1 1 0 1 0 : : 1 0 1 note (1) 0: low level voltage, 1: high level voltage www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 16 / 26 version 2.1 t h t c dclk t hd t vd t v de de data t vb t hb 6. interface timing 6.1 input signal timing specifications the input signal timing specifications are shown as the following table and timing diagram . signal item symbol min. typ. max. unit note frequency fc - 44.5 56 mhz - period tc 17.9 22.5 - ns high time tch - 4/7 - tc - lvds clock low time tcl - 3/7 - tc - setup time tlvs 600 - - ps - lvds data hold time tlvh 600 - - ps - frame rate fr 56 60 75 hz tv=tvd+tvb total tv 905 926 1050 th - display tvd 900 900 900 th - vertical active display term blank tvb tv-tvd 26 tv-tvd th - total th 750 800 960 tc th=thd+thb display thd 720 720 720 tc - horizontal active display term blank thb th-thd 80 th-thd tc - note: because this module is operated by de onl y mode, hsync and vsync input signals should be set to low logic level or ground. otherwise, this module would operate abnormally. input signal timing diagram www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 17 / 26 version 2.1 6.2 power on/off sequence to prevent a latch-up or dc operation of lcd module, the power on/off sequence should be as the diagram below. timing specifications: 0.5< t1 Q 10 msec 0 < t2 Q 50 msec 0 < t3 Q 50 msec t4 R 500 msec t5 R 450 msec t6 R 90 msec note. (1) the supply voltage of the external system for the modul e input should be the same as the definition of vcc. (2) apply the lamp voltage within the lcd ope ration range. when the backli ght turns on before the lcd operation of the lcd turns off before the backlight tu rns off, the display may momentarily become abnormal screen. (3) in case of vcc = off level, please keep the level of input signals on the low or keep a high impedance. (4) t4 should be measured after the module has been fully discharged between power of and on period. (5) interface signal shall not be kept at high impedance when the power is on. - power supply for lcd, vcc - interface signal (lvds signal of transmitter), v i - power for lamp restart power on power off 50% 50% 0v 0v 10% t6 t5 t4 t3 t2 t1 90% 10% 90% valid data on off off www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 18 / 26 version 2.1 7. optical characteristics 7.1 test conditions item symbol value unit ambient temperature ta 25 2 o c ambient humidity ha 50 10 %rh supply voltage v cc 5.0 v input signal according to typical val ue in "3. electrical characteristics" lamp current i l 7.0 ma inverter operating frequency f l 61 khz inverter sumida h05-5307 7.2 optical specifications the relative measurement methods of optical characteri stics are shown in 7.2. the following items should be measured under the test conditions described in 7.1 and stable environment shown in note (5). item symbol condition min. typ. max. unit note rx 0.636 red ry 0.349 gx 0.290 green gy 0.589 bx 0.143 blue by 0.080 wx 0.313 color chromaticity white wy typ ? 0.03 0.329 typ + 0.03 (1), (5) center luminance of white l c 230 300 --- cd/m 2 (4), (5) contrast ratio cr x =0 , y =0 cs-1000t 350 500 --- - (2), (5) t r --- 2 7 ms response time t f x =0 , y =0 --- 6 11 ms (3) white variation w x =0 , y =0 --- 1.3 1.5 - (5), (6) x + 65 75 --- horizontal x - 65 75 --- y + 60 70 --- viewing angle vertical y - cr R 10 50 60 --- deg. (1), (5) www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 19 / 26 version 2.1 note (1) definition of viewing angle ( x, y): note (2) definition of contrast ratio (cr): the contrast ratio can be calcul ated by the following expression. contrast ratio (cr) = l255 / l0 l255: luminance of gray level 255 l 0: luminance of gray level 0 cr = cr (1) cr (x) is corresponding to the contrast ratio of the point x at figure in note (6). note (3) definition of response time (t r , t f ): 12 o?clock direction y+ = 90o 6 o?clock y- = 90o x ? x + y- y + x- y+ y- x+ normal x = y = 0o x+ = 90o x- = 90o 100% 90% 10% 0% gray level 255 gray level 0 gray level 255 time t f optical response t r 66.67m 66.67ms www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 20 / 26 version 2.1 note (4) definition of luminance of white (l c ): measure the luminance of gray level 255 at center point l c = l (1) l (x) is corresponding to the luminance of the point x at figure in note (6). note (5) measurement setup: the lcd module should be stabilized at giv en temperature for 20 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 20 minutes in a windless room. note (6) definition of white variation ( w): measure the luminance of gray level 255 at 13 points w = maximum [l (1), l (2) ??l (4), l (13)] / minimum [l (1), l (2) ?? l (4), l (13)] 6 7 8 23 1 45 11 12 13 9 10 w h 10mm 10mm w/4 w/4 w/4 w/4 h/4 10mm h/4 h/4 h/4 10mm photometer (ca-210, cs-1000t) field of v iew = 2 o 500 mm lcd module lcd panel center of the screen light shield room (ambient luminance < 2 test point x 1 to 13 x a ctive area horizontal line number vertical line number www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 21 / 26 version 2.1 8. packaging 8.1 packing specifications (1) 5 lcd modules / 1 box (2) box dimensions: 545(l) x 320 (w) x 360 (h) mm (3) weight: approximately 13.87 kg (5 modules per box) 8.2 packing method (1) carton packing should have no failure in the following reliability test items. test item test conditions note vibration ista standard random, frequency range: 1 ? 200 hz top & bottom: 30 minutes (+z), 10 min (-z), right & left: 10 minutes (x) back & forth 10 minutes (y) non operation dropping test 1 angle, 3 edge, 6 face, 60cm non operation fi g ure. 8-1 packin g method www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 22 / 26 version 2.1 figure. 8-2 packing method for ocean shipping for air transport figure. 8-3 packing method www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 23 / 26 version 2.1 9. definition of labels 9.1 cmo module label the barcode nameplate is pasted on each module as illustrati on, and its definitions are as following explanation. (a) model name: M190A1-L01 (b) revision: rev. xx, for example: a0, a1? b1, b2? or c1, c2?etc. (c) cmo barcode definition: serial id: xx -xx -x -xx -ymd -l -nnnn code meaning description xx cmo internal use - xx revision cover all the change x cmo internal use - ymd year, month, day year: 2001=1, 2002=2, 2003=3, 2004=4? month: 1~12=1, 2, 3, ~, 9, a, b, c day: 1~31=1, 2, 3, ~, 9, a, b, c, ~, w, x, y, exclude i, o, and u. l product line # line 1=1, line 2=2, line 3=3, ? nnnn serial number manufacturing sequence of product (d) customer?s barcode definition: serial id: cm -19a11 -x -x -x -xx -l -xx -l -ymd -nnnn code meaning description cm supplier code cmo=cm 19a11 model number M190A1-L01=19a11 x revision code non zbd: 0~9, zbd: a~z x source driver ic code x gate driver ic code century=1, cll=2, demos=3, epson=4, fujitsu=5, himax=6, hitachi=7, hynix=8, ldi=9, matsushita=a, nec=b, novatec=c, oki=d, philips=e, renasas=f, samsung=g, sanyo=h, sharp=i, ti=j, topro=k, toshiba=l, windbond=m xx cell location tainan, taiwan=tn l cell line # 0~12=0~c xx module location tainan, taiwan=tn l module line # 0~12=0~c ymd year, month, day year: 2001=1, 2002=2, 2003=3, 2004=4? month: 1~12=1, 2, 3, ~, 9, a, b, c day: 1~31= 1, 2, 3, ~, 9, a, b, c, ~, t, u, v nnnn serial number manufacturing sequence of product www.datasheet.co.kr datasheet pdf - http://www..net/
issued date: aug. 30, 2005 model no.: M190A1-L01 approval 24 / 26 version 2.1 10. precautions 10.1 assembly and handling precautions (1) do not apply rough force such as bending or twisting to the module during assembly. (2) to assemble or install module into user?s system can be only in clean working areas. the dust and oil may cause electrical short or worsen the polarizer. (3) it?s not permitted to have pressure or impulse on the module because the lcd panel and backlight will be damaged. (4) always follow the correct power sequence when lcd module is connecting and operating. this can prevent damage to the cmos lsi chips during latch-up. (5) do not pull the i/f connector in or out while the module is operating. (6) do not disassemble the module. (7) use a soft dry cloth without chemicals for cleaning, because the surface of polarizer is very soft and easily scratched. (8) it is dangerous that moisture come into or c ontacted the lcd module, because moisture may damage lcd module when it is operating. (9) high temperature or humidity may reduce the per formance of module. please store lcd module within the specified storage conditions. (10) when ambient temperature is lower than 10oc may reduce the display quality. for example, the response time will become slow ly, and the starting voltage of ccfl will be higher than room temperature. 10.2 safety precautions (1) the startup voltage of backlight is approximat ely 1000 volts. it may cause electrical shock while assembling with inverter. do not disassemble the mo dule or insert anything into the backlight unit. (2) if the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth. in case of contact with hands, skin or clothes, it has to be washed away thoroughly with soap. (3) after the module?s end of life, it is not harmful in case of normal operation and storage. www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/
www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of M190A1-L01

	To Download M190A1-L01 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .